Reverse Osmosis System
RO 200 (Item No.:80545)
Product variants
Reverse Osmosis System
RO 300
Product details
Reverse osmosis units create the optimal starting water for marine water and freshwater aquaria. Many water problems can often only be resolved by using reverse osmosis water. Reverse osmosis units use the principle of physical filtration. Unlike ion exchangers, for example, which exchange ions (e.g. calcium) which cause hard water with other ions (e.g. sodium) which do not cause hard water, reverse osmosis unit physically removes pollutants (e.g. silicate, nitrate) and hardness components from the water. In a reverse osmosis unit, the water runs through a semipermeable membrane at the residential pressure in water lines of 2 − max. 6 bar. The substances (pollutants, salts or hardness components) which have dissolved in the water are unable to pass the fine lattice structure of the membrane and remain in the residual water. This residual water is discharged as concentrate and can easily be used for cleaning, watering or as service water. Dupla reverse osmosis units retain up to 95 − 98 % of all pollutants in tap water.
Tip: By connecting a Dupla ultrapure water filter (optional) downstream, even the smallest particles of silicates and nitrates are fully removed.
Scope of delivery:
- RO 200 fully assembled with (5 µm fine filter), carbon filter and membrane
- 3 x 2 m hose
- 3/4 inch tap connection
- flow limiter with built-in flush valve
- connecting clamps for prefilter and membrane housing
- wall bracket
- hose plug
- housing key for membrane
- housing
- operating instructions
Technical data:
max. output 200 l / day, varies by supply water quality
average output 120 − 200 l / day at 8 − 15° C and 3 − 5 bar pressure
average retention rate 95 − 98 %
aluminium 97 − 98 %
cadmium 95 − 98 %
bacteria 99 %
nitrate max. 90 %
silicate max. 90 %
sulphate 97 − 98 %
hardeners 95 − 98 %
Ratio concentrate: Permeate 4 : 1 / 3 : 1 depending on supply water quality and pressure.
Conductivity ratio tap water: permeate
| 1.000 µS | to 50 µS |
| 300 µS | to 15 µS| |
Conductivity ratio tap water: permeate with downstream Dupla ultrapure water filter
| 1.000 µS | to 1 µS |
| 300 µS | to 1 µS |
Spare parts:
- 80546 RO 200 replacement membrane
- 80547 Replacement 5 µm fine filter RO 200
- 80548 Replacement carbon filter RO 200
- 80545/6 Flow limiter with flush valve RO 200
- 80545/7 Membrane housing gasket kit RO 200 / 300
- 80519 3/4 inch tap connection
- 80545/18 Membrane housing key RO 200
Optional accessories:
- 80500 Filter housing FG 500
- 80511 Ultrapure water filter with colour indicator
- 80512 Silicate filter
- 80513 Nitrate filter
- 80514 Siliphos filter
- 80520 Aqua magnetic valve
